Changing the
light bulb...
Light Shield
Removing the bottom trivet...
To remove:
1 Lrft front of trivet out of supports
Lift the Front,
:! Pull Out
To replace:
Then Pull Out
1 Posrtion bock of trivet on the rear wall supports
2 Lower front into place
Energy saving tips...
You con help your freezer use less electricity
l
Check door gasket and level freezer to assure o
good door seal
l
Clean the condenser COIIS regularly
l
Keep dooropenrngs to a mrnrmum Remove several
Items at one time Keep contents organized to elim
note searchrng
l
Fill
to capacity Follow recommended procedures
for freezrng foods See pages 8 and 9
WARNING: To avoid possible shocks, first unplug
freezer or turn off electricity leading
to freezer at the main power supply.
1 Remove the light shield from the side of the control
panel. Depress the bock of the shield to release the
tabs, then pull away
2 Replace bulb with a 40.watt applrance bulb.
3 Replace the light shreld Insert the shteld tabs in the
slots, then press the shield to snap into place
4 Plug In power cord or switch on electricity
l
Set Temperature Control to provide temperatures
oround 0 F (
17 8 C) There
IS
no need to store
foods below 0 F
l
Keep door locked to ensure door closure
l
Do not let frost build up to more than ’ inch (6 mm)
thick Effrcrency
IS
reduced
l
Keep Power Saving Control on OFF when humrdlty
IS
low
Cleaning your freezer
Thus freezer is a No-Frost model and defrosts autorr ~~trcally Complete
cleanrng, however, should be done at least once a year
To clean:
After cleaning:
1 Turn Temperature Control to OFF
1 Replace shelves and trivet
2 Unplug power cord
2 Plug in power cord
3 Take out all food
3 See drrectrons for “Setting the Temperature Control:’
Note: Wrap frozen foods and packages In several
page 5
layers of newspaper and cover with a blanket Food
will stay frozen for several hours
WARNING: When moving the freezer, wipe up
4 Remove shelves and trivet
any water that may have spilled
from the defrost pan. Spilled water
5 Clean freezer according to the following directions
can cause slipping and injury.
