I
CYCLE CONTROL KNOB
Selecting a cycle
NORMAL WASH
Cycle
A double wash for normal to heav-
ily soiled loads. (The Energy Guide
Label data is based on this cycle.)
Cycle time is about 65 minutes.
LIGHT WASH Cycle
For normal, everyday soiled loads.
Cycle time is about 60 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be washed
one or more days later. Cycle time
is about 10 minutes.
Use AIR DRY onlv.
HEAT DRY
or AIR
DRY?
If the HEAT DRY Option is selected, air in the night) and some water spotting may result.
dishwasher is heated during the “dry” part of Some items (such as plastics) may need towel
the cycle.
drying.
If the AIR DRY Option is selected, air in the For best results, use a solid rinse aid.
dishwasher is not heated. Using this option helps
save energy, but dishes take longerto dry (over-
To
add a dish after starting
1. To be sure the added item is washed and
4. Close the door. Do not latch it. Wait 30 sec-
rinsed, make sure the Cycle Control Knob
onds for air in the dishwasher to warm ub This
has not passed LIGHT.
.. -r’ ....-
helps reduce the amount of mois ._._ .-.
:tl Ire thnt
2. Lift up on the door latch to unlatch the door can come from the vent when restarting the
and to stop the cycle. Don’t open the door
cycle.
until the spray arms stop spinning.
5.
press door firmly to Intoh it Thor rlichumchnr
l”,“, I II. II lb “,.zI I..“.Jl I”,
3. Open the door and add the dish.
will automatically stl
art where it stopped.
9
