![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/e/a9/ea9cdb5f-c2fb-4271-a99a-a8b6afd6b610/ea9cdb5f-c2fb-4271-a99a-a8b6afd6b610-bgd.png)
The PL-720 Display
This product is in compliance with VESA and ENERGY STAR power-saving guidelines.
When connected to a Display Power Management (DPMS)-compatible computer and
graphics board, the power savings indicated below are automatically realized during
times of non-operation.
Computer
Activity
Horizontal
Synchronizing
Signal
Vertical
Synchronizing
Signal
Picture
Signal
Power
Consumption
Power Lamp
Turned On Yes Yes Yes 37W or less Blue
Stand-by Mode No Yes No Less than 2W Orange/Blue*
Suspend Mode Yes No No Less than 2W Orange/Blue*
Off Mode No No No Less than 1W Orange
* Depending on the speciļ¬ cations and settings of your computer and video card, when in
standby and suspend modes, the power lamp may only light up orange.
The PL-720 Power Saving Function
In order to ensure optimal display image quality, this product utilizes the Auto-Adjust
function. When the Auto-Adjust function is operating, it may take a short time before the
screen displays properly. The settings initiated by Auto-Adjust are saved in the display.
If the Auto-Adjust function is operating, the horizontal and vertical positions as well as the phase
and pitch of the display are adjusted automatically when the display mode is received. The Auto-
Adjust function becomes operational when the horizontal frequency is in the 30-80KHz and the
vertical frequency is in the 50-75Hz range.
When the Auto-Adjust function is operating, only the power switch is operational.
Pen calibration may be necessary after adjusting screen position. ( P13)
The Auto-Adjust Function