22
7. Care and Maintenance — continued
7.7 Cleaning and Replacing the Sanitizing Light Bulb
The Sanitizing Light Bulb (A) is located on the bottom of the
Sanitizing Power Head (B).
Note: Before cleaning or replacing the Sanitizing Light
Bulb (A), disconnect Power Cord from electrical outlet.
Also disconnect the Sanitizing Power Head (B) from the
Telescoping Wand.
1. Turn the Sanitizing Power Head (B) over (bottom up)
with the Powered Brush Roll (C) closest to you.
2. With one hand, depress one Bulb Cover Release Tab (D)
by pulling it toward the Powered Brush Roll (C).
3. With the other hand, grasp the Squeegee (E) near the
Bulb Cover Release Tab (D) and gently lift the Bulb
Cover (F).
4. Repeat Steps 2 and 3 for the other Bulb Cover Release
Tab (D). The Bulb Cover (F) should now lift freely from the
Sanitizing Power Head (B).
5. Wipe the Sanitizing Light Bulb (A) clean with a soft,
drycloth.Becarefulnottoleavengerprintsonthe
Sanitizing Light Bulb (A) or the Reflector.
7.7a
D
D
E
A
B
C
C
F
F
F
E
VH04-MAN-2012_Web.indd 22 12/12/12 3:37 PM
