Uniden UBC396T Manual

A SERVICE OF

next previous

91

Programming/Editing Optional Settings

Select the channel  

 Set Attenuator 

This setting controls whether the scanner attenuates

signals on this channel. Select your setting, then press E.

On - the channel is attenuated by about 18 dB.

Off - the channel is not attenuated.

Notes:

• The default setting is Off.

• For trunked systems, the attenuation is a system-

level setting.

• You can also toggle this setting by holding on the

channel and pressing and E.

Setting Channel Lockout

 Program System  E 

Select the system  E 

Edit Group  E 

Select the group  E 



Edit Channel  

Select the channel  

 Set Lockout 

This setting determines whether the scanner will scan

this channel when its system and group are enabled.

Select your setting, then press E.

Lockout - the channel is not scanned.

Unlocked - the channel is scanned.

Notes:

Func

Menu