USING THE SPEED
DIAL MEMORY
USING THE SPEED DIAL MEMORY [ 21]www.uniden.com
If the next character
uses the same number
key, you must press the
#/ key to move the
cursor over. Otherwise
the next time you press
the number key, it
changes the character
that was previously set.
4) Enter a name according to the instructions below, then press the select/remote
key. If no name is required, go to step 5.
• The name can be up to 13 characters.
• Use the
#/ and /tone/
key
to move the cursor to the desired location.
• Use the
delete/chan key to delete characters as needed.
• Press and hold the
delete/chan key to delete all the characters.
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following
order: upper case letters first, lower case letters next and finally the number
corresponding to the key.
If you make a mistake while entering a name
Use the /tone/
or
#/ key to move the cursor to the incorrect character.
Press the
delete/chan key to erase the wrong character. Then enter the correct
character. To delete all characters, press and hold the
delete/chan key.
For example, to enter Movies.
1) Press
6. Then press the #/ key
to move the cursor to the right.
2) Press
6 six times.
3) Press
8 six times.
4) Press
4 six times.
5) Press
3 five times.
6) Press
7 eight times.
