98
Searching and Storing
2. Turn the scroll control until the type of search you
want appears, then press the scroll control to
select it. A search band appears.
If all systems are locked out, All Locked!
appears and the scanner does not store any fre-
quencies.
When you select a search range, the scanner looks for
active frequencies within that range and Search and
Store appears on the display’s lower line and the
system name and search range name appear on the
display’s upper line. When the scanner finds an active
transmission, it checks to see if the frequency has
already been stored in the system. If the frequency
has already been stored, the scanner continues to
search. If the frequency has not been stored, it stores
the frequency into a group named Found Channels,
then resumes searching. The scanner creates this
group if it doesn’t already exist.
Storing a Trunked System
You can store talk group ID’s into the system you
selected in “Selecting a System”. Otherwise, the scan-
ner stores talk group ID’s in a new group it creates.
Note: Trunked system search and store does not work
if an EDACS SCAT system is selected, a system with
no frequency is selected, the selected system is
locked out or the quick key for system to which the
system belongs is turned off, and the group you
selected to store found talk group ID’s contains more
talk group ID’s than the maximum set in Max Auto Store.
1. Follow Steps 1-3 under “Selecting a System”. A
search option appears.
2. Turn the scroll control until the type of search you
want appears, then press the scroll control to
select it. A search band appears. If all systems are
locked out, All Locked! appears and the scan-
ner does not store any frequencies.
