Flash (Picture Mode Only)
This camcorder has three ash settings. To change ash setting by either hot key (Right Button) or
Option Setting.
Auto ( •
): The ash res automatically according to light conditions. Use this mode for general
photography.
Red Eye• (
): The pre-ash will re to reduce the red-eye effect.
Off ( •
): The ash will not re under any circumstances. Use this mode when taking images in a
place where ash photography is prohibited, or when the subject is distant (beyond the range of the
ash).
Operation Display Screen
In Picture Mode submenu, pre1. ss UP/Down
button to select Flash.
Use Right/Left Buttons to move between 3 2.
settings.
Press OK Button to validate the setting.3.
Note
Theashwillbedisabledautomaticallywhenbatterypowerislow( ).
Self-timer (Picture Mode Only)
The self-timer allows you to take pictures with a ten-second time delay. The self-timer LED on the front
of the camcorder beneath the ash light will also blink. The speed of blinking will increase just before
the picture is taken.
Operation Display Screen
In Picture Mode submenu, press1. UP/Down
button to select Self-timer.
Use Right/Left Buttons to choose On or Off. 2.
Press OK Button to validate the setting.3.
