A SERVICE OF

logo

4.7 Modem Daughter Card 4 Replacement Procedures
TECRA M1 Maintenance Manual (960-436) 4-25
4.7 Modem Daughter Card
Removing the Modem Daughter Card
To remove the modem daughter card, follow the steps below and refer to figure 4-9 and 4-10.
1. Remove the following screw securing the modem daughter card cover. Insert your finger
into the slot and remove the cover by lifting it up from the side of screw hole.
M2.5×4 FLAT HEAD screw ×1
Modem daughter card cover
M2.5×4 FLAT HEAD screw
Slot
Figure 4-9 Removing the Modem daughter card cover