2. PRINTER SETUP ENGLISH VERSION EO1-33058
2.9 Setting an Operating Environment
E2-31
2.9.1 Parameter Setting
(Cont.)
(30) Print Head Type Selection
This parameter is to choose the print head type that is actually installed.
When “<2>PARAMETER SET” appears, press the [PAUSE] key until
the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting a print head type, press the [PAUSE] key.
(31) System Mode Password Setting
This parameter is for system administrators only.
Please do not change the setting for this parameter.
Press the [PAUSE] key to return to the start of the Parameter Setting
menu.
<2>PARAMETER SET
THERMAL HEAD V2
THERMAL HEAD V1
[RESTART]
[FEED]
Current type
(TPH128R4)
Enhanced type
(TPH128R5)
THERMAL HEAD V2
NOTE:
When the installed print head type is
changed, this parameter should be
also changed accordingly. Failure to
do this may affect the print quality or
rint head life.
<2>PARAMETER SET
PASSWORD OFF ----
