A SERVICE OF

logo

Open as PDF
next previous
AWG710&AWG710B Arbitrary Waveform Generator User Manual 3-233
FG Mode
The AWG710&AWG710B Arbitrary Waveform Generator provides the Function
Generator (FG) mode to output standard function waveform. This section describes
the FG mode.The product which has option 02 doesnโ€™t have offset function.
FG mode Signals are created and output using the following process:
๎‚„ Select the waveform type.
๎‚„ Set the output parameters such as frequency and amplitude.
๎‚„ Turn the OUTPUT button to ON.
Figure 3-75: Outline flow for producing Function Generator signal
Figure 3-76: FG mode screen (except option 02)
Select the
waveform type
Set the output
parameters
Push the OUTPUT
button
Output