
D14128.02—NOVEMBER 2008
67
Codec C90
System Integrator Guide
Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us
xCommand Boot
Boot system.
Example:
xCommand Boot
*r BootResult (status=OK):
*r/end
OK
CUIL reboot request, restarting
Connection closed by foreign host.
xCommand Call DisconnectAll
Disconnect all calls.
Example:
xCommand Call DisconnectAll
OK
*r DisconnectAllResult (status=OK):
*r/end
xCommand Call Accept
Accept incoming call. If no call id is specified, all incoming calls will be accepted.
Required parameters with (r):
CallId: <0..65534>
Example:
xCommand Call Accept CallId:19
OK
*r CallAcceptResult (status=OK):
*r/end
The Boot command
The Call commands
xCommand Call Disconnect
Disconnect specified call.
Required parameters with (r):
CallId(r): <0..65534>
Example:
xCommand Call Disconnect CallId:17
OK
*r DisconnectCallResult (status=OK):
*r/end