22
PPT 8800
Tapping the screen
buttons or icons
does not activate
the corresponding
feature.
LCD screen not cali-
brated correctly.
Calibrate the screen. See Calibrating
the Screen on page 8.
A message ap-
pears stating that
your terminal’s
memory is full.
Too many files stored
on the terminal.
Delete unused memos and records.
You can save these records on your
computer.
Memory allocation
too low.
Adjust the memory allocation. Select
Start - Settings, and select the System
tab. Tap Memory icon and adjust the
slider.
Too many applica-
tions installed on the
terminal.
If you have installed additional applica-
tions on your terminal, remove them to
recover memory. Select Start - Set-
tings, and select the System tab. Tap
Remove Programs, select the unused
program and tap Remove.
When receiving
beamed data an
out of memory
message appears.
Not enough free
memory available for
receiving data.
Your terminal requires at least twice the
amount of memory available as the
data you are receiving. For example, if
you are receiving a 30K application,
you must have at least 60K free.
Beamed data does
not transmit.
Terminals too close
together.
Confirm that the terminals are 12”
apart, and there is a clear path between
the two devices.
Insufficient room light-
ing.
Adjust the room lighting or move to a
different location.
IrDA window is dirty
or obstructed.
Gently clean the IrDA window using a
tissue or other non-abrasive material.
Do not spray any cleaner directly on the
IrDA window.
Problem Cause Solution
