A SERVICE OF

logo

Open as PDF
next previous
Chapter 2 Chassis Service Procedures 2-5
4. Turn the levers clockwise to the lock position.
See
FIGURE 2-5.
FIGURE 2-5 Turning Filler Panel Lock Levers Clockwise
5. Repeat from Step 1 for any remaining vacant slots.
2.2 Midplane Connector Pins
Caution – All midplane connector pin operations require the Sun Datacenter Switch
3456 to be fully powered off.
2.2.1 Tools
For inspecting pins, you need the following tools:
■ Pin gauge block
■ Bright flashlight
■ Magnifying glass or loupe
■ Notepad and pen