A SERVICE OF

logo

– 14 –
ENGLISH
5-3. 76mm Width Support
76mm width support is an available accessory when adding to or changing the
configuration of the printer.
1 Open the printer cover.
2 Use a screwdriver to remove the
M2 screws that fasten the 80mm
holders to the upper case and the
holder lever. Replace the 80mm
holders with the optional 76mm
holders.
76mm holders
Support spacers
Upper case
M2 screw
80mm holders
76mm holders
Holder lever
M2 screw
Caution
Be careful not to drop any of the
screws.