A SERVICE OF

logo

Open as PDF
next previous
CONNECTING SR-lo/15 TO YOUR COMPUTER
To complete the installation, you’ll need to connect SR-lo/15
to your computer. Figure l-8 shows where the cable connects,
but there’s more that you need to know. Find the appendix and
follow the guidelines for making connections (“interfacing”) and
for setting the DIP switches.
If you cannot connect to your
computer, then your Star dealer will give you advice on connecting
SR-lo/15 to your computer.
--
Figure 1-8. SR-lo/15 has parallel interface as standard.
-
Then, in Chapter 2, you’ll learn how to load paper (here’s where
you’ll use the paper guides) and operate SR-10/15.
-
-
-
8