Hookups
21
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use . If the
amplifier (receiver) has a digital input jack, use . When connecting to an MD deck or a DAT
deck, use . In this case, connect the player directly to the MD deck or DAT deck without
using your stereo amplifier (receiver).
xRecommended surround sound effects for the connection only
•TVS STANDARD (page 45)
z
In connection , you can use the supplied audio/video cord instead of using a separate audio cord.
zTo realize better surround sound effects, make sure that your listening position is in between your speakers.
Note
If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the connection.
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
B
B-1
B-2
B-2
B-1
B-1
B-2
PCM/DTS/MPEG/
DOLBY DIGITAL
R-AUDIO-L VIDEO
COAXIAL
LINE (RGB)-TV
LINE OUT
S VIDEO OUT
DIGITAL OUT
LINE OUT
R-AUDIO-L VIDEO
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL
DIGITAL OUT
B-2
B-1
l: Signal flow
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front
(L)
Front
(R)
[Speakers]
(white)
(red)
to coaxial digital input
Coaxial digital cord
(not supplied)
Stereo audio cord
(not supplied)
to audio input
(white)
(red)
continued
