Table of
contents
Operation
Search
MENU/Settings
Search
Index
26
GB
Intelligent Sweep Panorama
The camera takes multiple shots during a sweep, and allows you to create a panoramic image
from composed images. The camera also automatically detects people’s faces or moving
subjects.
1 Lower the lens cover to switch to shooting mode.
2 (REC Mode) t (iSweep Panorama)
3 Align the camera with the end of the subject to be
shot and press the shutter button fully down.
4 Pan the camera to the end of the guide,
following the indication on the LCD
screen.
• If you cannot pan the camera across the entire subject within the given time, a gray area occurs in the
composed image. If this happens, move the camera faster to record a full panoramic image.
• Since several images are stitched together, the stitched part will not be recorded smoothly.
• Under low light conditions, panoramic images may be blurred or the shooting may not be successful.
• Under lights that flicker such as fluorescent light, the brightness or color of the combined image is not
always the same.
• When the whole angle of panoramic shooting and the AE/AF locked angle are very different in
brightness, color and focus, the shooting will not be successful. If this happens, change AE/AF locked
angle and shoot again.
• Intelligent Sweep Panorama is not suitable for the following situations:
– When objects are too close to the camera
– An image with little contrast such as the sky, a sandy beach, lawn or underwater
– An image with constant change such as waves or waterfalls
– When many objects are moving, such as a school of fish
– When it is difficult to stay still such as underwater
• You cannot create panoramic images in the following situations:
– You pan the camera too fast or too slow
– There is too much camera shake
Notes
This part will not be taken
Guidance
bar
Continued r
