SPECIFICATIONS
(continued)
V831
D
Tweeter: ¾" (19mm) Silk dome, Ferrofluid cooled,
pivoting
Midrange: 4" (102mm) Polypropylene cone, rubber
surround, pivoting
Woofer: 8" (203mm) Polypropylene cone, rubber
surround
Frequency Response: 45Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 Watts minimum; 100 Watts maximum
Sensitivity: 89dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: None
Dimensions (H x W x D): 9
7
/8”x 15
15
/16”x 3
7
/8” (251mm x 405mm x 99mm)
Cutout Dim (W x H): 8
7
/16” x 14½”(214mm x 368mm)
Shipping Weight: 16 lbs. (7.3kg) Pair
DIMENSIONS
(all virtuoso D-Series speakers)
Sonance Virtuoso
®
D-Series
8” In-Wall Speakers
212 Avenida Fabricante
San Clemente, CA 92672-7531 USA
(800) 582-7777 or (949) 492-7777
FAX: (949) 361-5151
Technical Support: (800) 582-0772
www.sonance.com
®2006 Dana Innovations.Sonance,Virtuoso,Sonic Eye,RotoLock, Sonafill and FastMount are trademarks or registered trademarks of Dana Innovations.All Rights Reserved.
All features and specifications are subject to change without notice. For the latest Sonance product information go to www.sonance.com
03/06
OPTIONAL ACCESSORIES:
Virtuoso
D
Metal Grille (part# 92289): Metal replacement for included grilles.
Virtuoso
D
Cloth Grille (part# 92284): Cloth-covered replacement for included
grilles.
Virtuoso
D
FlexBracket (part# 92246): Plastic template to reserve a mounting hole
for the speaker in new construction. Designed to be used with the RotoLock®
mounting system. Note: Not for use with Architectural Finish Installation Kits.
Virtuoso
D
Coverplate (part# 92244): Covers the hole made by the FlexBracket
during construction until the speaker is installed.
Virtuoso
D
Acoustic Enclosure (part# 91708): ½” MDF enclosure that provides ideal
acoustic performance and maximum reduction of sound transmission into
adjacent spaces. Designed for use only in new construction.
Virtuoso
D
Retrofit Enclosure (part# 92242): Molded enclosure that reduces sound
transmission into adjacent rooms and spaces. Can be used in both new
construction and retrofit installations.
Sonafill
®
In-Wall System (part# 91698): Retrofittable acoustical treatment for
in-wall speakers consisting of two pillows and four tiles that virtually eliminates
noise produced by resonating drywall. Dramatically improves midbass sound
quality and reduces sound transmission into adjacent rooms.
Virtuoso V831D
