A SERVICE OF

logo

5
Start the mower
Move the cutting height adjust lever (A, Figure 4)
to the desired cutting height.
Set the mower to mulch, discharge or bag.
(See 3-in-1 instructions.)
Hold the bail control (A, Figure 5) against the
drive handle.
Pull the recoil rope handle (B) until the
engine starts.
To engage the drive system, slowly pull the
drive lever (C) back. To increase ground speed,
slowly pull the drive lever farther back. To
decrease ground speed, slowly release the
drive lever.
To disengage the drive system, release the
drive lever.
To stop the engine and blade, release the
bail control.
6
Figure 4
A
Figure 5
A
C
B