23
Part1
QUICK START GUIDE
Part2 Part3
3. Unit price programming (Press
s
to skip. / Press
A
to terminate.)
4. Associated dept. programming (Press
s
to skip. / Press
A
to terminate.)
5. Sign programming (Press
s
to skip. / Press
A
to terminate.)
s
(2) Press the
s
key to register setting.
On the upper line of the display, guidance message
for the next setting will be displayed.
On the lower line of the display, the current setting
will be displayed.
(1) Go to (2) when the sign does not need to be
changed from "(+)". Otherwise, press
:
key to
display "(-)".
Each time
:
key is pressed, the display shows "(-
)" and "(+)" alternately.
Choose "(+)" for positive entry and "(-)" for negative
entry.
Default setting is "(+)" for all 1800 PLU codes.
s
(2) Press the
s
key to register the associated
dept. code.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
1
(1) Enter an associated dept. code using numeric key.
Default setting is dept. 1.
For deleting PLU, enter 0 instead of an associated
dept. code.
s
(2) Press the
s
key to register the unit price.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting will
be displayed.
500
(1) Enter a unit price using numeric keys.
A maximum of 6 digits can be set.
For a subdepartment, set the limit amount of unit
price entry.
Default setting is 0.
s
(3) Press the
s
key to register the item name.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
A303_1(En) 06.7.22 9:20 AM Page 23
