Serial port
24
How to configure the driver
At a Glance During driver installation, a default profile is proposed. This profile can be modified
or a new one created.
How to create a
new profile
From the driver configuration screen.
Step Action
1 Click on the Add... button. see Uni-Telway parameters, p. 21.
2 Enter station name.
3 Select COM port.
4 Define the driver slave address.
5 If the driver uses a modem to communicate, select the Use modem box and
enter the different fields associated with it.
6 Select the Line parameters (See Line parameters, p. 22) tab.
7 Configure the transmission parameters according to the remote device (baud
rate, parity, data bits, etc.).
8 If the driver requires specific configuration, click on the Advanced (See
Advanced parameters, p. 23) tab and configure the parameters according to the
remote device.
9 Accept the configuration by clicking on Ok.
Result: the new configuration appears in the list.
