2
Press the + and - keys to
specify a leading edge margin.
✏ Press the + key to increase
the margin width and - to
decrease the width.
✏ If you enter a wrong value,
press the Clear/Stop key and
reenter a correct value.
3
Press the Edge Margin key.
The specified value goes on. The
"Trailing Edge" indicator flashes
when the "Synchro Cut" mode is
selected.
✏ You can start copying here
when the "Manual Feed,"
"Preset Cut," or "Variable
Cut" mode is selected.
4
Press the + and - keys to
specify a trailing edge margin.
✏ If you enter a wrong value,
press the Clear/Stop key and
reenter a correct value.
5
Press the Edge Margin key.
The specified value goes on.
Both margins are set.
BASIC
COPYING 13
