Copying
192
2
E Enter the horizontal size of the stamp with the number keys, then press
the
[
#
]
key.
Note
❒
To change the value entered, press the
[
Clear
]
or
{
Clear/Stop
}
key and en-
ter the new value.
❒
You can enter sizes within 10 – 432mm, 1.0" – 17.0" horizontal, and 10 –
297mm, 1.0" – 11.7" vertical. However, if the value exceeds the maxi-
mum value of the area (5,000mm
2
, 7.75 inch
2
), it is corrected within the
range of the area automatically.
F Press the
[
Vertical
]
key, and enter the vertical size in the same way as step
E.
G Set the user stamp on the exposure glass, and then press the
[
Scan Start
]
key.
Note
❒
Do not set the original in the document feeder.
❒
The machine scans the original three times. Do not lift the document
feeder until the main menu of the Copy features appears.
❒
If you press the
[
Exit
]
key, the main menu of the Copy features appears
with nothing programmed.
H Press the
[
Exit
]
key.
