Basic Recording
✤ The EASY.Q mode works only in Camera mode.
✤ The EASY.Q mode allows a beginner to easily make good recordings.
1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE.
(VP-D353(i)/D354(i)/D355(i) only)
3. By pressing the EASY.Q button, all functions on the
Camcorder will be set to off and the recording settings will be
set to the following basic modes:
■
Battery level, recording mode, counter, date/time, and DIS
( ) will be displayed.
■
The word EASY.Q will appear on the LCD screen at the
same time. However, the Date/Time will only be seen if it
has been previously set. (see page 33)
4. Press the Start/Stop button to start recording.
Recording will begin using the basic automatic settings.
5. Press the EASY.Q button again in the STBY mode and then
turn the EASY.Q mode off.
■
The EASY.Q function will not turn off while you are
recording.
■
The camcorder will return to the settings that were set prior
to activating EASY.Q mode.
[ Notes ]
■
In EASY.Q mode, certain functions are not available, such as
Menu, BLC, Manual focus.
If you want to use these functions, you must first turn the
EASY.Q mode off.
■
The EASY.Q mode settings are deleted when the Battery
pack is removed from the Camcorder and must be reset
when the Battery pack is replaced.
■
EASY.Q mode will not turn off during a recording.
■
Taking a photo image using the PHOTO button while EASY.Q is set releases
DIS function.
■
Digital Zoom, COLOR NITE SHUTTER or Digital Effect is not available in the
EASY.Q mode.
Using EASY.Q Mode (for Beginners)
✤
✤
■
■
■
■
■
■
■
■
■
EASY.Q
4040
ENGLISH
60min
0:00:10
SP
STBY
3
1
√
