GB
15
GB
14
The user set is initially set at the factory. If you want to make any
change to the USER SET, please follow the instructions below.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the ,
,
button to select user set.
Result
: The USER SET1 is displayed.
3 Press ,
,
to select the USER SET1 item.
4 Check below to change the item.
* USER SET1
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the ,
,
button to select user set.
Result
: The USER SET1 is displayed.
3 Press ,
,
to select the USER SET2.
4 Press ,
,
to select the USER SET2 menu item.
5 Check below to change the item.
* USER SET2
USER SET1 Setting
USER SET2 Setting
Setting the Date and Time
Your VCR contains a 24-hour clock and calendar used to:
◆ preset your VCR to record a programme automatically.
You must set the date and time when:
◆ you purchase the video cassette recorder.
◆ the power supply remains off for more than 60 minutes.
☛ ◆ The date and time are set automatically from the
broadcast signal, but this function will not operate if
there is no PDC or Teletext signal.
◆ Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the or buttons, until the cursor is placed in front of the
CLOCK SET option.
3 Press the button to select this option.
Result
: The CLOCK SET menu is displayed.
4 Press or to select the hour, minutes, day, month and year.
Result
: The option selected flashes.
5 Press the or buttons to increase or decrease the value.
Result
: The day of the week is displayed automatically.
➢ You can hold the or buttons down to scroll more
quickly through the values.
6 On completion, press MENU twice to exit the menu.
ITEM USAGE COMMENT
TAPE tape length select Select the recording tape type for
SELECT remain time.
CLOCK 12H/24H mode Select your favorite clock type.
TYPE
PLAY play tape system The VCR automatically select play
SYSTEM selection system. If an auto detection error
occurs, then select the play
system manually.
OSD OSD display on/off Initial setting is on.
USER SET2 USER SET2 select Select to go to USER SET2 page.
ITEM USAGE COMMENT
NICAM NICAM on/off Initial is on(NICAM stereo mode).
(EUROPE only) If the NICAM stereo sound is
distorted, then select off mode for
mono sound receiving.
COLOR COLOR or B/W Initial is on. Color off mode is B/W.
select If color distortion occurs in the
play or conversion mode, then
select colour off mode.
BLUE BLUE SCREEN Initial is blue screen on.
SCREEN on/off If any problem is occurred by blue
screen, then select blue screen off.
SQPB S-VHS Playback See page 32.
USER SET1 USER SET1 select Select to go to USER SET1 page.
**
M E N U
**
TIMER PROGRAMMING
❿
USER SET
INSTALLATION
LANGUAGE SET
CLOCK SET
#❷
❿
END:(MENU)
**
M E N U
**
TIMER PROGRAMMING
❿
USER SET
INSTALLATION
LANGUAGE SET
CLOCK SET
#❷
❿
END:(MENU)
**
USER SET1
**
❿
TAPE SELECT :E180/
T120
CLOCK TYPE :24H
PLAY SYSTEM :AUTO
OSD :ON
USER SET2
#❷
❿
END:(MENU)
**
USER SET1
**
TAPE SELECT :E180/
T120
CLOCK TYPE :24H
PLAY SYSTEM :AUTO
OSD :ON
❿
USER SET2
#❷
❿
END:(MENU)
**
USER SET2
**
❿
NICAM :ON
COLOR :ON
BLUE SCREEN :ON
SQPB :OFF
USER SET1
#❷
❿
END:(MENU)
AUTO MENU
