English - 65
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to
Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to
Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side depending on the model). If the mono sound comes
out of the left speaker, press the
DUAL I-II button.
➢
DTV mode
Selecting the Sound Mode (depending on the model)
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual I/II
Regular broadcast
(Standard audio)
Bilingual or Dual I/II
Stereo
On-screen indication
Mono
(Normal use)
NICAM ↔ Mono
Mono (Normal)
NICAM ↔ Mono
Stereo (Normal)
Mono (Normal use)
Dual I ↔ Dual II
Stereo ↔ Mono
(Forced mono)
NICAM → NICAM → Mono
Dual I Dual II (Normal)
NICAM
Stereo
A2
Stereo
→
→
Mono
Stereo
Dual Mono
On-screen
indication
When press the
DUAL I-II button
After changing channels
(Default Mode)
Mono
Stereo
↔
Mono
Dual I
→
Dual II
Dual
Mono
Stereo
Dual I
Mono
Stereo
Dual I
→
BP68-00491A (J60C_UK) 2005/04/18 05:11 PM Page 65
