43
Timer Recording
Before timer recording
• The current date and time must be set on the Setup menu. (See page 33)
• The timer recording scheduling can be done only when the DVD-R2000 has a RAM disc or a disc is
not inserted.
To Set the Timer Recording
1
Insert a DVD-RAM disc.
Press the TIMER button on the remote control.
- Display the Timer REC scheduling
2
Use the UP/DOWN button to select the program number. Up to
8 program numbers can be selected.
3
Press ENTER to select the Program No.
4
Use the UP/DOWN button to select the source for the record-
ing.
- Press the RETURN/INPUT button to select the Line Input( L1~L3) when setting
the Src.
- To change the channel when the Line Input has been set, press the
RETURN/INPUT button until the Channel No. appears, and press UP/DOWN but-
ton.
5
Press the RIGHT button. Use the UP/DOWN/LEFT/RIGHT button
to select the Date you want to do the timer recording.
6
Press the RIGHT button. Use the UP/DOWN/LEFT/RIGHT button
to select the Start Time.
7
Press the RIGHT button. Use the UP/DOWN/LEFT/RIGHT button
to select the correct End Time.
8
Press the RIGHT button. Use the UP/DOWN button to select the
Type of timer recording.
- Normal: Record once.
- Daily: Record daily at a set time Monday through Friday. (When Friday is set,
the following recording day becomes the next Monday.)
- Weekly: Record at a set time once a week. (When Saturday is set, the follow-
ing recording day becomes the next Saturaday.)
- Every: Record at a set time every day.
Advanced Functions
3 5 -- / -- -- : -- -- -- : -- -- ------ --
3 5 05 / 31 -- : -- -- -- : -- -- ------ --
3 5 05 / 31 12 : 41 Am -- : -- -- ------ --
3 5 05 / 31 12 : 41 Am 02 : 42 Pm ------ --
3 5 05 / 31 12 : 41 Am 02 : 42 Pm Normal --
