Assembly
Care & Maintenance
Replaceable Parts
Warranty
To Use
Contents
Contenu
Assembly To Use
TM TM
TM
TM
3
2 InstallFront
Wheels
Position front wheel with
Zapp logo facing outward.
Insert front wheel until you
hear “click” (Figure 2). Repeat
for other front wheel. Pull to
confirm it is assembled securely.
2
4 AttachSeat
Lower seat onto frame until it
clicks into place (Figure 4).
Push down on seat pan until it
clicks (Figure 4a).
NOTE: Seat adapters are
pre-assembled on frame and must
always be in place to attach seat.
See page 5 for more information.
CAUTION:Stroller frame
must be in open and in use
position to install seat adapters
and seat.
4
4a
3c
3b
3d
Push in on button (Figure
3b).
Push in on button while
lifting up on the handles until
they click into place (Figure
3c).
Extend the handle crossbar
into the horizontal position until
you hear a “click” (Figure 3d).
3
3a
3 UnfoldStroller
Frame
Unfasten transport strap
(see parts list image).
Gently lift on the sides of
the stroller (Figure 3).
Pull out on grey pedal until
you hear a “click” (Figure
3a).
1 InstallRear
Wheels
Insert the rear wheel axle
into the frame until you hear
a “click” (Figure 1). Repeat
for other rear wheel. Pull
to confirm it is assembled
securely.
1
