A SERVICE OF

logo

Open as PDF
next previous
19
Appendix B -- Mounting the Detector
The following procedures are recommended for mounting detectors and their associated adapters to the LS-785.
Refer to the photographs for additional information.
1. Determine the detector to be attached to the LS-785.
2. Locate the correct adapter flange or adapter flange assembly for the detector to be attached to the LS-785.
3. If the correct adapter is not attached to the LS-785, refer to the photograph of the adapter attached and
remove it.
4. If the adapter flange to be installed is for a PIXIS, the four #8-32 socket head screws and washers used to
secure the other adapters must be re-installed into the instrument housing to prevent light leaks!