Administrator Guide - SoundPoint
®
IP / SoundStation
®
IP Optimization
Copyright © 2004 Polycom, Inc 77
4.6.1.5.1.3 Miscellaneous Patterns
The following table maps miscellaneous patterns to their usage within the phone.
4.6.1.5.2 Ring type <ringType/>
Ring type is used to define a simple class of ring to be applied based on some creden-
tials that are usually carried within the network protocol. The ring class includes
attributes such as call-waiting and ringer index, if appropriate. The ring class can use
one of four types of ring that are defined as follows:
In the following table, x is the ring class number. The x index needs to be sequential.
Miscellaneous
pattern number
Use within phone
1 new message waiting indication
2 new instant message
3 not used
4 local hold notification
5 positive confirmation
6 negative confirmation
7 welcome (boot up)
ring Play a specified ring pattern or call waiting indication
visual Provide only a visual indication (no audio indication) of incoming call (no
ringer needs to be specified).
answer
Provide auto-answer on incoming call
a
.
a. Note that auto-answer on incoming call is currently only applied if there is no other
call in progress on the phone at the time.
ring-answer
Provide auto answer on incoming call after a ring period
b
.
b. See note a.
Attribute Permitted Values Interpretation
se.rt.enabled 0,1 Set to 1 to enable the ring type feature within
the phone, 0 otherwise.
