
11
Change general settings
1 Press - .
2 Select [General Setup] , then press OK .
3 Select and adjust the following settings:
• [OSD Language] : Selects the on-
screen display menu language.
• [Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
• [DivX® VOD Code] : Displays the
DivX VOD registration code for the
home theater.
4 Press OK to conÀ rm your choice.
Note
Before you purchase DivX videos and play •
them on the home theater, register the home
theater on www.divx.com using the DivX
VOD code.
Change video settings
1 Press - .
2 Select [Video Setup] , then press OK .
3 Select and adjust the following settings:
• [TV System] : Selects a TV system that
is compatible with the TV.
• [TV Display] : Selects a picture display
format to À t the TV screen.
• [Screen Fit] : Selects a full screen
format that best À ts to the TV screen.
• [Picture Settings] : Selects a
predeÀ ned color setting.
• [Progressive] : Enables or disables
progressive scan mode.
4 Press OK to conÀ rm your choice.
Note
The best setting is automatically selected for •
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
Some video settings depend on the video
•
source, ensure that the disc and the TV
support the setting or feature.
6 Change settings
This section helps you to change the settings of
your home theater.
Caution
Most of the settings are already conÀ gured •
with the best value for the home theater.
Unless you have a speciÀ c reason to change a
setting, it is best to leave it at the default value.
1 Press - .
The following menu appears. »
Symbol Description
[General Setup]
[Video Setup]
[Preference Setup]
2 Select a setup menu, then press OK .
See the following sections for information
about how to change the settings of your
home theater.
3 Press - to return to the previous
menu, or press
- to exit.
Note
You cannot change a setting that is grayed out. •
English
EN
1_HTS2200_93-EN-US.indd Sec1:11 7/19/2010 1:42:29 PM