HUDSON 9
78
3.7 Power management
The monitor must comply with the Microsoft on Now specification, and meet EPA requirements.
Mode HSYNC VSYNC Video Power-cons. Indication Rec. time
Power-On On On active 36W Typ. Green LED --
off Off Off blanked < 1W Amber LED < 3 s
DC Power Off N/A < 1W LED Off
3.8 VGA Display identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
3.10 DDC/ CI Support
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable with Protrait Display
Tune at least.
3.10 EDID
Data for EDID & .inf file
Data for EDID & .inf file
1
User visible strings on .inf file Philips 190V (19inch LCD MONITOR 190V9)
2
Manufacturer ID ( EDID data) PHL
3
Product ID, "xxxx" 4 codes MSB(byte 12): C0
LSB (byte 11): 20
4
maximum resolution 1280x1024
5
Horizontal Frequency Range 30~83 KHz
6
Vertical Frequency Range 56~76Hz
7
Monitor Name (13 characters max.) Philips 190V
3.11 Hot-key definition
Item Key Key press time OSD Timeout OSD Message
Monitor Controls
Lock
[Menu] 6 sec 5 sec
Monitor Controls Locked
Monitor Controls
Unlocked (default)
Factory Mode [AUTO]+[Menu]+[Power]
DDC/CI On/OFF
for VISTA
[MENU]+[DOWN] 5 sec 5 sec
DDC/CI On (default)
DDC/CI Off
If any deviation, then refer to PVT Exit sample.
3.12 Dynamic contrast
Smart Contrast is a kind of dynamic backlight control.
This function changes the panel backlight dynamically according to the frame brightness histogram.
The contrast ratio is 3000:1 (typical).
4. Visual characteristics
4.1 Test conditions
Unless otherwise specified, this specification is defined under the following conditions.
(1) Input signal : As defined before, 1280 x 1024
non-interlaced mode (1280 x 1024@75Hz ),
http://www.wjel.net
