WR1500 4-Port Wireless DSL/Cable Router
®
13
Enter a descriptive name (up to 32 printable 7-bit
Enter a descriptive name (up to 32 printable 7-bit
ASCII characters) for the wireless LAN.
If you change this fi eld on the WR1500 Wireless
Router, make sure all wireless stations use the
same ESSID in order to access the network.
To manually set the WR1500 Wireless Router to
use a channel, select a channel from the drop-
screen to make sure the channel is not already
used by another AP or independent peer-to-peer
To have the WR1500 Wireless Router automatically
Click this button to have the WR1500 Wireless
Click this button to have the WR1500 Wireless
Router automatically scan for and select a channel
with the least interference.
allows all wireless computers to
communicate with the Wireless Routers without
Select this option in order to enter ASCII characters
Select this option in order to enter ASCII characters
Select this option to enter hexadecimal characters
Select this option to enter hexadecimal characters
as the WEP keys. The preceding “Ox” is entered
automatically. Leave this in front of our key.
used to encrypt data. Both the WR1500 Wireless
Router and the wireless stations must use the
same WEP key for data transmission.
characters or 10 hexadecimal characters (“0-9”,
characters or 10 hexadecimal characters (“0-9”,
ASCII characters or 26 hexadecimal characters
You must confi gure all four keys, but only one key
can be activated at any one time. The default key
to return to the previous screen.
Continued next page
