3. Configuration Options
9000-A2-GB31-00 December 2002
3-57
PLAR3idle The signaling bits transmitted to the cross-connected
T1 interface during a CGA represent the idle state for
a PLAR D3 interface (ABCD = 0000).
PLAR3idle
PLAR3busy The signaling bits transmitted to the cross-connected
T1 interface during a CGA represent the busy state
for an PLAR D3 interface (ABCD = 1111).
PLAR3busy
PLAR4idle The signaling bits transmitted to the cross-connected
T1 interface during a CGA represent the idle state for
a PLAR D4 interface (ABCD = 1111).
PLAR4idle
PLAR4busy The signaling bits transmitted to the cross-connected
T1 interface during a CGA represent the busy state
for an PLAR D4 interface (ABCD = 0000).
PLAR4busy
DPO-idle The signaling bits transmitted to the cross-connected
T1 interface during a CGA represent the idle state for
a DPO interface (ABCD = 0000).
DPT-idle
DPO-busy The signaling bits transmitted to the cross-connected
T1 interface during a CGA represent the busy state
for a DPO interface (ABCD = 1111).
DPT-busy
DPT-idle The signaling bits transmitted to the cross-connected
T1 interface during a CGA represent the idle state for
a DPT interface (ABCD = 0000).
DPO-idle
DPT-busy The signaling bits transmitted to the cross-connected
T1 interface during a CGA represent the busy state
for a DPT interface (ABCD = 1111).
DPO-busy
USER-xxxx The signaling bits transmitted to the cross-connected
T1 interface during a CGA represent a user-defined
pattern of ABCD = xxxx.
USER-xxxx*
* xxxx is the same value on both the Network and the DSX-1 sides.
Table 3-23. Signaling and Trunk Conditioning Values (3 of 3)
Network Side Meanings DSX-1 Side
