A SERVICE OF

logo

G-13980-A2-GB30-20 November 1996
Default Configuration Options
Overview G-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview
Table G-1 lists all default configuration options for the
main four factory preset configurations. (Additional
configuration options set by the Cellular (Mobile) and
Cellular (PSTN) factory preset configurations are listed
under the &F5 and &F6 commands in Chapter 13.) An
N/A indicates that the value for this configuration option
does not appear on the LCD if that factory default
configuration is selected.
Table G-1
(1 of 4)
Factory Default Configuration Options
Configuration Option
Async Dial and UNIX
Dial Default Settings
Sync Dial
Default Settings
Sync Leased Answer/
Originate Mode
Default Settings
DTE INTERFACE
Async/Sync Mode
Async DTE Rate
Async # Data Bits
Async Parity Bit
Async # Stop Bits
DTR Action
DSR Control
RTS Action
CTS Control
RTS/CTS Delay
LSD Control
TX Clock Source
CT111 Rate Control
DTE Rate = VF Rate
Async
19,200 bps
8
None
1
Ignore
Forced ON
Ignore
Forced On
Wink When Disc
1
0 msec
Standard RS232
Wink When Disc
1
N/A
Disable
Disable
Sync
N/A
N/A
N/A
N/A
Standard RS232
Standard RS232
Standard RS232
Standard RS232
0 msec
Standard RS232
Internal
Disable
Disable
Sync
N/A
N/A
N/A
N/A
Ignore
Standard RS232
Standard RS232
Standard RS232
0 msec
Standard RS232
Internal
Disable
Disable
1
UNIX Dial default setting only.
G