8. Programmable Features
64
Receiving a fax into the
computer
{#}{4}{4}{2}
If you wish to receive a fax into the computer, activate this feature and
run [PC FAX] from Multi-Function Station.
{0} “OFF” (default): Deactivates this feature.
{1} “ALWAYS”: If the unit recognizes the connection to the computer,
it will transfer a received document to the computer. If the unit cannot
recognize the connection, it will store a received document in the
memory once, then transfer the data after recognition of the
connection.
{2} “CONNECTED”: If the unit recognizes the connection to the
computer, it will transfer a received document to the computer. If the
unit cannot recognize the connection, it will print out the data.
Resetting fax features to
their default settings
{#}{4}{5}{9}
{0} “NO” (default)
{1} “YES”
To reset the fax features:
1. Press { MENU}.
2. Press {#}, then {4}{5}{9}.
3. Press { 1} to select “YES”.
4. Press { SET}.
5. Press { SET} again.
6. Press { MENU}.
Feature/Code Selection
FLB811-PFQX2307ZB-en.book Page 64 Thursday, February 16, 2006 3:57 PM
