3. Telephone
41
2. Press {1} to select “1=Phone book”.
3. Press {v} or {e} repeatedly to display the
desired item.
4. Press {CALL} (soft key).
L The unit will start dialing automatically.
L If required, repeat steps 1 to 4 for any
remaining numbers.
Note:
L If you have rotary or pulse service, you need
to press {*} before pressing {MENU} in
step 1 to change the dialing mode
temporarily to tone.
L To prevent misdialing, we recommend you
add pauses where needed when storing
numbers. For example, add pauses after a
telephone number when storing in the phone
book (page 39) if a PIN number is to be dialed
after it.
3.5.2 With the base unit
1 Press {>}.
2 Press {A} or {B} repeatedly to display the
desired item.
3 Press {SP-PHONE}.
L An available line is automatically selected
and {LINE1} or {LINE2} will light. To
change the line selection, see feature #37
on page 81 and feature 0*5 on page 90.
L You can also select a line by pressing
{LINE1} or {LINE2}.
To search for a name by initial
Example: “LISA”
1. Press {>}.
2. Press {A} or {B} to initiate the phone book.
3. Press {5} repeatedly to display any name
with the initial “L” (see the character table,
page 32).
L To search for symbols, press {1}.
4. Press {B} repeatedly to display “LISA”.
L To stop the search, press {STOP}.
L To dial the displayed number, press {SP-
PHONE}. An available line is
automatically selected and {LINE1} or
{LINE2} will light. To change the line
selection, see feature #37 on page 81 and
feature 0*5 on page 90.
You can also select a line by pressing
{LINE1} or {LINE2}.
3.6 Editing a stored item
L Keep the front cover page open for button
locations.
3.6.1 With the handset
Make sure the handset is not being used.
1 Press {MENU}, then {*}.
2 Press {v} or {e} repeatedly to display the
desired item.
3 Press {EDIT} (soft key).
L If you do not need to edit the name, skip
to step 5.
4 Edit the name. For further details, see the
storing procedure on page 39.
5 Press {v}.
L If you do not need to edit the telephone
number, skip to step 7.
6 Edit the telephone number. For further
details, see the storing procedure on page
39.
7 Press {v}.
8 Press {SAVE} (soft key).
9 Press {OFF}.
3.6.2 With the base unit
1 Press {>}.
2 Press {A} or {B} repeatedly to display the
desired item.
3 Press {MENU}.
4 Press {*}.
L If you do not need to edit the name, skip
to step 6.
5 Edit the name. For further details, see the
storing procedure on page 39.
6 Press {SET}.
L If you do not need to edit the telephone
number, skip to step 8.
7 Edit the telephone number. For further
details, see the storing procedure on page
39.
8 Press {SET}.
FG6550-PFQX2225ZA-en.book Page 41 Monday, August 8, 2005 8:16 PM
