26
CONTRAST
LCD
REDIAL/
PAUSE
LINE
SELECT
FLASH/
SUB-ADDR
SET
ORIGINAL COPY
SIZE SIZE
LEDGER
LEGAL
INVOICE
LETTER
LETTER
MONITOR
RESET
START
123
456
789
0
PQRS
GHI
TUV
JKL
ABC
WXYZ
MNO
DEF
STOP
ON LINE
ON LINE
DATA
FAX
INTERNET
PRINTER
MULTI-SIZE
FEED
SORT
ALARM ACTIVE
CLEAR
ENERGY SAVER
DP-3000
INTERRUPT
FUNCTION
TONE
COPY
ADD TONER
MON. VOL.
Margin/Book/Edge
■■
■■
■ Procedure
NOTE
Zoom/Effects
∗
Initial setting (Factory setting) can be changed by the User Mode function.
(See page 38, No. 00, 01, 02)
∗∗
If a part of the copied image is missing when using the Margin mode, change
the Margin Reduction setting to ON.
(See page 38, No. 03)
CTo reset each mode menu, touch the CANCEL key on the touch panel.
Margin
#Select the Margin area
$Adjust each void width by using the F·G keys.
The image is moved only by the void width which has
been set.**
%Touch the OK key.
∗
Initial setting (Factory setting): 10 mm
#Adjust each void width by using the F·G keys.
$Touch the OK key.
∗
Initial setting (Factory setting): 20 mm
#When the vertical and horizontal void areas are the
same, adjust the void width by using the F·G keys, then
touch the OK key.
$When the vertical and horizontal void areas are different,
select vertical or horizontal edge.
%Adjust each void width by using the F·G keys.
&Touch the OK key.
∗
Initial setting (Factory setting): 5 mm
Book
Edge
5
Press
START
1
Place the
Original
2
Select ZOOM/
EFFECT Mode
3
Select Edge
Margin or Book
4
Number
of Copies
