RQT6530
18
Listening operations
A
B
1
2
5
123
45
/CLEAR
L
CD
-/J
123
456
10
7890
2
SLEEP
-AUTO OFF
CLOCK/
TIMER
PLAY/
REC
123
DISC
456
≥
10
7890
DISPLAY DIMMER
AUX TUNER TAPE CD
PLAY MODE
/
PROGRAM
/REW/ /FF/ /CLEAR
MUTING
S SOUND EQ PRESET EQ
VOLUME
1
3
5
1
7
/REW
/ ,
/FF/
7
CD
-/J
PROGRAM
3
4
DISC
4
ALBUM
CDs
Program play
By remote control only
This function allows you to program up to 24 tracks.
1 Press [CD 2/ J] and then [L /CLEAR].
2 Press [PROGRAM].
3 Press [DISC].
4 (within 10 seconds or so)
Press [1] – [5] to select the disc you want.
5 Press the numeric button(s) to select the
track you want to play in the desired
sequence.
6 Repeat steps 3 through 5 until you have
programmed all the tracks you want.
7 Press [CD 2/ J].
Play will start in the programmed sequence.
To cancel program play mode
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
To clear all programmed tracks
Press [L
/CLEAR] in the stop mode. “CLEAR” is displayed.
To select a two-digit track
Press [ 10] and then the two numbers you want.
A
When “CD FULL” appears
The number of programmed tracks is limited to 24. No
further tracks can be programmed.
B
You can do the following during program mode:
• Check program contents.
Press [
44
44
4/REW/
g] or [
33
33
3/FF/f].
Every time you press one of the buttons, the track and
program No. are shown on the display.
• Add to the program.
Repeat steps 3 through 5.
Memory retention
Your program is retained in memory for about 1 week while
the system is unplugged.
To replay your program
If you turned OFF your program with [PROGRAM], you can
play it again as explained below.
1. Press [PROGRAM].
2. Press [CD 2/ J].
If you program a track not on your CDs
The track is initially programmed, but during program play,
the player will skip that track and will continue playing from
the next programmed item.
Note
• During program play, you can search forward or backward
only within the current track.
• During program play, skipping is always in the programmed
order, whether forward or backward.
Specified track
number
Program order
Indicates program mode
RQT6530(16-22).p65 5/9/2002, 6:41 PM18
