Features Summary
69
The unit provides various programming features. Program the desired settings by referring to the
programming tables (p. 70–77).
1
Press p.
Display:
2
Select the feature you wish to program.
SYSTEM SET UP
PRESS NAVI.[
IH]
Programming!
General programming method
Programming by entering the program code
number directly
You can select a feature by directly entering the
program code (# and 2-digit number) instead of
using ( or ) in step 2.
1. Press p
.
2. Press # and the 2-digit code number.
3. Follow steps 3 to 5 above.
●
See programming tables for code numbers
(p. 70–77).
To cancel programming
Press p to exit the program.
For basic features (p. 70, 71):
Press ( or ) until the desired
feature is displayed.
For advanced features (p. 71–77):
Press ( or ) until the following is
displayed:
then press w and press ( or ) until
the desired feature is displayed.
●
The current setting of the feature will be
displayed.
3
Press + or - until the desired setting
is displayed.
●
This step may be slightly different
depending on the feature.
4
Press w.
●
The setting you selected is set, and the
next feature will be displayed.
5
To exit programming, press p.
ADVANCED MODE
PRESS SET
