![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/9/b3/9b3f7d20-994e-47ed-a2c5-5b02843f53c4/9b3f7d20-994e-47ed-a2c5-5b02843f53c4-bg15.png)
21
Copying
5.5"
8.5"
11"
Legal
17"
11"
8.5"
Legal
5.5"
8.5" x 11"
(Letter-R)
8.5" x 14"
(Legal)
11" x 17"
(Ledger)
5.5" x 8.5"
(Invoice-R)
5.5"
8.5"
11"
Legal
17"
11"
8.5"
Legal
5.5"
5.5" x 8.5"
(Invoice)
8.5" x 11"
(Letter)
Align the original to top left corner mark ( ).
● If the original is not positioned properly, a
por
tion of the original may not be copied.
● For originals smaller than 5.5" x 8.5"
(In
voice) size, position the original within
the 5.5" x 8.5" area and select 5.5" x 8.5".
Original Orientation
Ex: 5.5" x 8.5"
Original Guides
A
A
5.5" x 8.5"
(Invoice)
5.5" x 8.5"
(Invoice-R)
Notice for Platen
For Portrait Orientation
Original Guides
For Landscape Orientation
CAUTION
!
● When copying with the ADF open, do not look directly at the exposure lamp.
Direct eye exposure can cause eye fatigue, or eye injury.
● When copying a thick original, do not use excessive force to press it against the Platen Glass.
The Glass ma
y break and cause injuries.
Copying a thick booklet
● If there are less than 5 mm of white margin on originals, the edge of the copied paper may get
b
lurred in white. To avoid the problem, change the setting of "Digital Skyshot Mode" to "No". For
setting of "Digital Skyshot Mode", refer to Copier Settings in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.
● After copying a thick booklet, open the ADF and verify that the ADF Hinge was returned to
original position in order to prevent the rear of the ADF from being raised.