73
Function
■ Copier Settings
Screen
No.
00 Paper Size Priority Selects paper size priority LETTER
●LEDGER, LEGAL, LETTER, LETTER-R,
INVOICE, A3, B4, A4, A4-R, B5, B5-R, A5,
8 x 13, 8.5 x 13
01 Original Mode Default Selects original setting T/P
●Text, T/P (Text/Photo), Photo
02 Text Contrast Selects contrast for Text mode 4
●1 ~ 7
03 T/P Contrast Selects contrast for Text/Photo mode 4
●1 ~ 7
04 Photo Contrast Selects contrast for Photo mode 4
●1 ~ 7
Modes Function
Initial
Setting
01/05
NOTE
● The Key Operator ID Code is required before any changes can be made to items on this page.
■ General Settings
Screen
No.
Modes Function
Initial
Setting
45 Special Paper Tray 3 Sets the Paper Tray for special paper None
(ex: colored).
●None, Tray 1, Tray 2, Tray 3, Tray 4, LCT,
Bypass
46 Special Paper Tray 4 Sets the Paper Tray for special paper None
(ex: colored).
●None, Tray 1, Tray 2, Tray 3, Tray 4, LCT,
Bypass
47 Special Paper Tray 5 Sets the Paper Tray for special paper None
(ex: colored).
●None, Tray 1, Tray 2, Tray 3, Tray 4, LCT,
Bypass
48 Data Deletion Of HD Selects the deletion level of hard disk data in Basic
every copy/print job.
●Basic, Medium, High
When the optional hard disk unit is installed,
every copy/print job data is automatically
deleted after each job is completed.
Select one of the 3 available Data deletion
security levels (Basic, Medium and High).
For higher security select Medium and High,
however, the deletion time increases with the
increase in security level, and may take
longer to erase the data.
10/10
