To collate multiple copies
The unit can collate multiple copies in the same
order as the original document pages.
Example: Making two copies of a 4-page original
document
1. Press ) 2 times after step 3 on page 52.
Display:
2. Press + or - repeatedly until the
following is displayed.
3. Press y.
COLLATE ON [+ -]
<RESOLUTION>
H
COLLATE OFF [+ -]
<RESOLUTION>
H
To enlarge a document
1. Press ) after step 3 on page 52.
Display:
2. Press + to select “150%” or “200%”,
then press y.
●
The unit will only enlarge the
centermost part of the document,
printing it on two pages.
ZOOM 100% [+ -]
<COLLATE>
H
To reduce a document
1. Press ) after step 3 on page 52.
Display:
2. Press - to select “92%”, “86%” or “72%”,
then press y.
●
See the right table for the recommended
reduction rates.
Note:
●
If the appropriate reduction rate is not
selected, the document may be divided and
the top of the second sheet will be deleted.
●
If the image at the bottom of the document is
not copied when you copy a document as
long as the recording paper, try 92% or 86%.
ZOOM 100% [+ -]
<COLLATE>
H
Letter
100%
(default)
92%
86%
72%
Original documentSetting Recording paper
Letter
Letter
Letter
Letter
A4
A4
Legal
A4 Legal
Legal Letter, A4, Legal
A4 A4, Letter
Letter = 216 mm x 279 mm (8
1
/2
"
x 11
"
)
Legal = 216 mm x 356 mm (8
1
/2
"
x 14
"
)
A4 = 210 mm x 297 mm (8
1
/4
"
x 11
11
/16
"
)
Note:
●
The unit will store the documents into memory
while collating the copies. If memory becomes
full while storing, the unit will only print out the
stored pages.
●
After copying, the collating feature will turn off
automatically.
