HD3000 User’s Guide
Professional Video Scaler and Color Management System
HD3000 User’s Guide 42
Image Mode
For easy, care-free operation, HD3000 comes with preset image modes. Once the front-
end is correctly fine tuned in SETUP and IMAGE, user can simply switch among the pre-set
modes to have different image effects.
1. Use “h”, “i” arrow keys to select the “Image Mode” adjustment item, press “Enter” key
or “g” key to enter this adjustment item. The OSD disappears and only displays a small
adjustment bar (as shown below).
2. Use “f”, “g” arrow keys to select the preferred image mode. There are 4 preset modes:
Film, TV, Linear and one-user modes; each mode is fine tuned for specific desired image
performances. Please refer to the following description:
Mode Description
Film Simualte a Movie Theater image
performance, darker with great
picture depth, more a “film-like”
experience, suitable for a complete
dark room enviroment.
TV Normal mode is brighter, and the
image is more “TV-like”
Linear This mode is by pass mode for
natural image.
User
3. User can select and setup their favorite setting on the “User” mode and an adjust
submenu that shows as the following:
Image Mode -User
Output
Input
Level:
Value:
1
25
Reset
4. Use “f”and “g” arrow keys to select a different Input level or select the “reset” function;
user may adjust output value by using “h” or “i” in each input level.
