10
English
Installation
Lens cap
Power
1
3
Powering On the Projector
1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely
connected.
3. Turn on the lamp by pressing Power button on the
control panel.
The startup screen will display for 20 seconds and the
Power/Standby indicator will flash green.
When the startup screen disappear, the Power/Standby
indicator will light up green.
4. Turn on your source (computer, notebook, video player ,
etc.). The projector will detect your source automatically.
v If the screen displays No Signal , please make sure the signal
cables are securely connected.
v If you connect multiple sources at the same time, use the Source
button on the Remote Control or Panel Control to switch.
Powering On/Off the Projector
vTurn on the projector
first and then the
computer.
