11
4.Using the Monitor
EN
4. Using the Monitor
4.1 Applying the Arm Cuff
You can wrap the cuff either on your right or left arm.
• Remove tight-fitting clothing from
your upper arm.
• Do not place the cuff over thick
clothes and do not roll up your
sleeve if it is too tight.
1. If the cuff is assembled correctly, the
hook material will be on the outside of
the cuff loop and the metal D-ring will
not touch your skin.
Note: If the cuff is not assembled,
pass the end of the cuff fur-
thest from the tubing through
the metal D-ring to form a loop. The smooth cloth should
be on the inside of the cuff loop.
2. Insert the air plug into the air jack (on the left side of the
device).
The cuff must be fully deflated when it is inserted into the air
jack.
Pile side material
Sewn hook material
D-ring
Air plug
Air jack
