A SERVICE OF

logo

Network Configuration> 19
SMTP Tab
This allows you to configure SNMP related items.
ITEM EXPLANATION
Authentic
Community
This community name
is used to check
whether incoming
SNMP requests have
the correct community
name or not. The
community name is
displayed as ******
for security reasons.
TRAP
Community
This community name is assigned to outgoing system
traps such as cold start, authentication failure, etc.
TRAP
Address
Set a destination IP address of a Trap packet. If
0.0.0.0 is set, the Trap is disabled.
SysContact Set SysContact (printer manager) name.
SysName Set SysName (printer model name).
SysLocation Set SysLocation (the location where the printer is
installed).
Default TTL Set TTL (Time To Live) value.
Enable
Authentic
Trap
Set Authentic Trap to enabled/disabled.