E64
Reference Section
Electronic VR
Choose whether or not to use electronic VR (vibration reduction), which reduces the effects of
camera shake during shooting.
B Notes About Electronic Vibration Reduction
• The effectiveness of electronic vibration reduction decreases as camera shake increases.
• The image captured using electronic vibration reduction may be somewhat “grainy” in
appearance.
• Electronic vibration reduction does not function under the following conditions or in the
following shooting modes:
- When slow sync with red-eye reduction (A52) is used.
- When exposure exceeds a certain length of time.
-When Sports, Night portrait, Dusk/dawn, Night landscape, Museum, Fireworks show or
Backlighting scene modes are used.
-When Blink proof (E44) in smart portrait mode is set to On.
-When ISO sensitivity (E35) is set to any setting other than Auto in A (auto) mode.
• When Electronic VR is set to Auto, the angle of view (the area captured in the recorded movie)
during movie recording is smaller.
Press the d button M z menu icon M Electronic VR M k button
Option Description
w Auto
When taking still images, electronic vibration reduction is enabled when R
(A7) is displayed in the monitor and all of the conditions below are met.
• Flash mode is set to Off or Slow sync.
• Shutter speed: Slower than 1/30 seconds (wide-angle position), 1/60
seconds (telephoto position)
• Continuous is set to Single.
• The subject is dark.
When recording movies, vibration reduction is enabled at all times.
Off (default setting) Electronic vibration reduction is disabled.
