M-Nav 650 || User Manual 39
11 Multi-stop Trips
You can use the Multi-stop Trip screen to set multiple destination points for your trip. Your route will be
calculated to go via each of these points in the speciļ¬ed order.
Destination points can be added via the Multi-stop Trip screen or by selecting Show Details from the
pop-up menu on the 2D Map screen, then Add to Trip.
You can save up to 200 multi-stop trips, each with up to 14 destination points.
11.1 Case Study 1: Europe and New Zealand
This case study will show you how to set a multi-stop trip by selecting your country, then area, then
street, then house number for each destination point.
Note:
This case study applies to Europe and New Zealand only. For navigating in Australia, Canada and
USA, see Section 11.2.
Step 1: Start Your Multi-stop Trip
a. From the Main Menu, select the Multi-stop Trip option. The Multi-stop Trip screen will display.
b. Select Add, then press
OK
. The Add to Trip screen will display.
10. Planning A Route / 11. Multi-stopTrips
